At the beginning my minority of questions

Anything about the Open Source code, downloads, documentation. Suggestions welcome.
sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Mon Feb 25, 2019 4:04 pm

Probably my RPI is now connected. I will be able to confirm it in about 3 hours.

- Jerzy

penny
Posts: 84
Joined: Mon Oct 10, 2016 2:02 pm

Re: At the beginning my minority of questions

Post by penny » Mon Feb 25, 2019 5:07 pm

Hi Jerzy

Sorry - this was my fault. I had not added you to iptables. We have tested and it now works.

BTW when are you off to the boat ?

Cheers
Penny

sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Mon Feb 25, 2019 6:22 pm

Penny,

Thank you. It is great news.
I checked it. Now it works.
Now I will try to switch to 4G.

Will everything still work after reinstalling RPI from my site ?

Greetings,
Jerzy
Last edited by sq5npw on Mon Feb 25, 2019 6:29 pm, edited 1 time in total.

sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Mon Feb 25, 2019 6:25 pm

PS
I will launch the boat in the first days of May

crb
Site Admin
Posts: 52
Joined: Mon Oct 10, 2016 1:08 pm

Re: At the beginning my minority of questions

Post by crb » Tue Feb 26, 2019 7:24 pm

sq5npw wrote:
Mon Feb 25, 2019 6:22 pm
Penny,

Thank you. It is great news.
I checked it. Now it works.
Now I will try to switch to 4G.

Will everything still work after reinstalling RPI from my site ?

Greetings,
Jerzy
Hi Jerzy,

I'm a bit confused. Why would you want to reinstall? If you reinstall from the ISO you will need to re-register and start from scratch. Have I misunderstood?

Cheers,
Colin

sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Fri Mar 01, 2019 2:24 pm

Hello Colin,

I am sorry for delay, I had a lot of work.

Speaking of reinstallation, I wanted to experiment with Raspbian upgrades.
Besides, I promised to check potential conflicts with internel BT in Jessie for RPI 3B +.
I wanted to do it on the new installation from ISO.
But if so, I will stay with my acting version.

Now I am going to start the SCU's.
I have a question: you use HC-05 in SCU, do not you?

Best Regards,
Jerzy

crb
Site Admin
Posts: 52
Joined: Mon Oct 10, 2016 1:08 pm

Re: At the beginning my minority of questions

Post by crb » Sat Mar 02, 2019 11:48 am

Hi Jerzy,

HC-05 is fine HC-06 works too.

Cheers,

Colin

sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Tue Mar 05, 2019 2:24 pm

Thanks Colin,

I used HC05 and I managed to run the Voltage SCU without problems.
I connected a small battery and see its voltage.

Unfortunately, I can not see the Voltage Graph Line - I can see the window without a Graph.
Battery voltage is measured non-stop for more than 24 hours.
Is it too little time to generate a Graph or did I make a mistake?

I connected the voltage sensor as described in the pdf file:
"What to Do With A Card / ISO" making manual modifications in the database.

Then, without success, I tried to add the DHT22 temp/humidity sensor in the same way.
Here, before I ask for help, I must investigate whether I have made a mistake myself.

- Jerzy

crb
Site Admin
Posts: 52
Joined: Mon Oct 10, 2016 1:08 pm

Re: At the beginning my minority of questions

Post by crb » Tue Mar 05, 2019 3:11 pm

Hi Jerzy,

Your voltage unit is capturing readings. I have checked the database and sent you a private message giving you the link to do the same. Have you configured the limits on the graph 'Y' axis? boat menu/Settings/Voltage Settings

Have you checked the immediate reading - boat menu/Control/Sensor Panel?

Cheers,

Colin

sq5npw
Posts: 23
Joined: Sun Feb 03, 2019 11:59 pm

Re: At the beginning my minority of questions

Post by sq5npw » Tue Mar 05, 2019 10:24 pm

Yes I configured limits. Maybe I made a mistake.
And yes I checked reading.
I attached printscreens.

J.
Attachments
Settings.jpg
Settings.jpg (31.51 KiB) Viewed 1891 times
Read.jpg
Read.jpg (35.66 KiB) Viewed 1891 times
Graph.jpg
Graph.jpg (26.12 KiB) Viewed 1891 times

Post Reply